Each roller has a double bearing arrangement and can be changed very quickly by virtue of a unique clamping device that ensures dismantling bearings is unnecessary. The high level of stability of the drum makes it possible to keep the distance between the rollers very small (< 4 mm).
The retention time in the peeler is controlled by means of a horizontal auger screw. There are two separate water spray systems on the outside of the rollers that can each be controlled individually. If required, water can also be applied to the inner side of the rollers through the shaft of the auger screw. The motors are built into a separate and hygienic compartment above the peeling area.
The revolver peeler type CRR is specially designed for peeling small diameter sized products such as small potatoes and carrots. The recommended product diameter is between 5 and 45 mm (0.2”- 1.77”).
The capacity of the peeler depends on the required peeling percentage. Depending on the carborundum coating used, 300 to 700 kg can be peeled per hour.
• peeling with or without water
• control panel on a base